|
|
H-Line Sector 15/90
|
This sector antenna works at the frequency of 2,4 GHz in a horizontal polarization.
It is suitable to use as a substitute of heavy slotted antennas.
Vertical beam width of 15 degrees allows for connecting points in short distances,
where height of a location requires the wide vertical beamwidth.
This antenna is made of microwave PCB, which gives incomparable high gain in comparison
with its dimensions.
A shield is made of durable ABS material, this enclosure protects our antennas fully
from severe weather conditions.
Antenna is equipped with the stainless bracket, which offers 15 degrees of mechanical
up or down tilt.
H-Line Sector 15/90 antenna comes with N Female connector in standard. Antennas
carry a 3 year warranty.
|
|
antenna type
|
sector
|
|
frequency range
|
2,4-2,5 GHz
|
|
gain
|
15 dBi
|
|
polarization
|
horizontal
|
|
|
back ratio
|
15 °
|
|
|
vertical beam width
|
90 °
|
|
|
VSWR
|
up to 1,5
|
|
|
input impedance
|
50 Ohm
|
|
|
back ratio
|
N/A dB
|
|
|
connector
|
N Female
|
|
|
wind loading
|
N/A m/s
|
|
|
mounting
|
mast mounting
|
|
|
set content
|
antenna, brackets, data sheet, manual
|
|
|
dimensions
|
560 x 138 x 40 mm
|
|
|
weight
|
700 g
|
|
|
package
|
cardboard
|
|
H-Line Sector 14/120
|
This sector antenna works in a horizontal polarization. It is suitable to use as
a substitute of heavy slotted antennas.
Vertical beam width of 16 degrees allows for connecting points in short distances,
where height of a location requires the wide vertical beamwidth.
This antenna is made of microwave PCB, which gives incomparable high gain in comparison
with its dimensions. A shield is made of durable ABS material, this enclosure protects
our antennas fully from severe weather conditions. Antenna is equipped with the
stainless bracket, which offers 15 degrees of mechanical up or down tilt. H-Line
Sector 14 antenna comes with N Female connector in standard. Antennas carry a 3
year warranty.
|
|
antenna type antenna type
|
sector
|
|
frequency range
|
2,4-2,5 GHz
|
|
gain
|
14 dBi
|
|
|
polarization
|
vertical
|
|
|
vertical beam width
|
16 °
|
|
|
horizontal beam width
|
120 °
|
|
|
VSWR
|
1 up to 1,5
|
|
|
input impedance
|
50 Ohm
|
|
|
back ratio
|
N/A dB
|
|
|
connector
|
N Female
|
|
|
wind loading
|
~N/A m/s
|
|
|
mounting
|
mast mounting
|
|
|
set content
|
antenna, brackets, datasheet, manual
|
|
|
dimensions
|
560 x 138 x 40 mm
|
|
|
weight
|
700 g
|
|
|
package
|
cardboard
|
|
V-LineSector 17 dBi
|
High gained sector antenna working on a vertical polarization with the gain of 17
dBi. It is suitable to use in base station in areas where work a lot of horizontal-polarization
antennas. The gain of 17 dBi makes create long links easier. A shield is made of
durable ABS material, this enclosure protects our antennas fully from severe weather
conditions. The bracket offers 20 degrees of mechanical up or down tilt. V-Line
Sector 17 antenna comes with N Female connector in standard. Antennas carry a 3
year warranty.
|
|
antenna type
|
sector
|
|
frequency range
|
2,4 - 2,5 GHz
|
|
gain
|
17 dBi
|
|
polarization
|
vertical
|
|
back ratio
|
Tn/a dB
|
|
vertical beam width
|
14 ° for -3dB
|
|
horizontal
beam width
|
120 ° for -3dB
|
|
|
VSWR
|
1,0 to 1,5
|
|
|
Impedance
|
50 Ohm
|
|
|
connector
|
N Female
|
|
|
mounting
|
pole mount
|
|
|
bracket diameter
|
30 - 50 mm
|
|
|
dimensions
|
700 x 139 x 45 mm
|
|
|
weight without brackets
|
800 g
|
|
|
package
|
paperboard
|
|
V-LineSektor 15 dBi
|
Sector antenna with 15 dBi gain, which works in a vertical polarization. It is suitable
to use in base station in areas where work a lot of horizontal-polarization antennas.
Vertical widebeam (17 degrees) allows for connections in medium distances. This
antenna is made of microwave PCB, which gives incomparable high gain in comparison
with its dimensions. A shield is made of durable ABS material, this enclosure protects
our antennas fully from severe weather conditions. The bracket offers 20 degrees
of mechanical up or down tilt. V-Line Sector 15 antenna comes with N Female connector
in standard. Antennas carry a 3 year warranty.
|
|
antenna type
|
sector
|
|
frequency range
|
2,4 - 2,5 GHz
|
|
gain
|
15 dBi
|
|
polarization
|
vertical
|
|
back ratio
|
n/a dB
|
|
vertical beam width
|
17 °
|
|
horizontal
beam width
|
180 °
|
|
VSWR
|
1 to 1,4
|
|
Impedance
|
50 Ohm
|
|
connector
|
N Female
|
|
mounting
|
pole mount
|
|
bracket diameter
|
30 - 50 mm
|
|
dimensions
|
615 x 55 x 33 mm
|
|
weight
|
400 g
|
|
package
|
paperboard
|
|
SectorEter 21 dBi
|
SectorEter21 antenna is predicted 2,4 GHz frequency for base stations.
Antenna works at the horizontal polarization and has 21 dBi gain.
At present it is one of the most high-gain sector antennas, which are available
on the market.
Three SectorEter21 antennas can cover the omni area up to 20km.
The sector antenna of SectorEter21 is made of aluminium waveguide, with cut-set
dimensions of 50x100mm, which allows for the horizontal band wide of 150 degrees
(with the full antenna gain). The antenna has 16 slots. Using gold plated elements
allows for strong signal and failure free operation for long time.
SectorEter21 antenna comes with N Female connector and it's equipped with stainless
and robust mast mount bracket, which allows downtilt of 15 degrees. Antennas carry
a 5 years warranty.
|
|
antenna type
|
sector
|
|
frequency range
|
2,4 - 2,5 GHz
|
|
gain
|
For 2,442 GHz (7th channel), 21 dBi
dBi
|
|
polarization
|
8horizontal
|
|
back ratio
|
0 dB
|
|
vertical beam width
|
6 ° for -3dB
|
|
horizontal
beam width
|
I150 ° for -3dB
|
|
VSWR
|
1 to 1,8
|
|
|
Impedance
|
50 Ohm
|
|
|
connector
|
gilded N/Female with Teflon insulator
|
|
|
mounting
|
-pole mount
|
|
|
bracket diameter
|
30 - 50 mm
|
|
|
dimensions
|
1450 x 100 x 50 mm
|
|
|
weight
|
2250 g
|
|
|
package
|
paperboard
|
|
V-LineSector 13 dBi
|
SectorEter 17 dBi antenna is predicted 2,4 GHz frequency for base stations. Antenna
works at the horizontal polarization and has 17 dBi gain.
The vertical beam width of 11 degrees facilitates the connections in short distances
when the height location requires the wide vertical beamwidth.
The sector antenna of SectorEter 17 is made of aluminium waveguide, with cut-set
dimensions of 50x100mm, which allows for the horizontal band wide of 150 degrees
(with the full antenna gain).
Using gold plated elements allows for strong signal and failure free operation for
long time.
SectorEter 17 antenna comes with N Female connector and it's equipped with stainless
and robust mast mount bracket, which allows downtilt of 15 degrees. Antennas carry
a 5 years warranty.
|
|
antenna type
|
sector
|
|
frequency range
|
2,4 - 2,5 GHz
|
|
gain
|
For 2,442 GHz (7th channel), 17 dBi
dBi
|
|
polarization
|
horizontal
|
|
back ratio
|
0 dB
|
|
vertical beam width
|
11 °
|
|
horizontal
beam width
|
150 °
|
|
VSWR
|
1 to 1,8
|
|
|
Impedance
|
50 Ohm
|
|
|
connector
|
gilded N/Female with Teflon insulator
|
|
|
mounting
|
-pole mount
|
|
|
bracket diameter
|
30 - 50 mm
|
|
|
dimensions
|
790 x 100 x 50 mm
|
|
|
weight
|
2050 g
|
|
|
package
|
paperboard
|
|
|
|
|
|
SectorEter 17 dBi
|
SectorEter 17 dBi antenna is predicted 2,4 GHz frequency for base stations. Antenna
works at the horizontal polarization and has 17 dBi gain.
The vertical beam width of 11 degrees facilitates the connections in short distances
when the height location requires the wide vertical beamwidth.
The sector antenna of SectorEter 17 is made of aluminium waveguide, with cut-set
dimensions of 50x100mm, which allows for the horizontal band wide of 150 degrees
(with the full antenna gain). Using gold plated elements allows for strong signal
and failure free operation for long time.
SectorEter 17 antenna comes with N Female connector and it's equipped with stainless
and robust mast mount bracket, which allows downtilt of 15 degrees. Antennas carry
a 5 years warranty.
|
|
antenna type
|
sector
|
|
frequency range
|
2,4 - 2,5 GHz
|
|
gain
|
For 2,442 GHz (7th channel), 17 dBi
dBi
|
|
polarization
|
horizontal
|
|
back ratio
|
0 dB
|
|
vertical beam width
|
311 °
|
|
horizontal
beam width
|
150 °
|
|
VSWR
|
1 to 1,8
|
|
|
Impedance
|
50 Ohm
|
|
|
connector
|
gilded N/Female with Teflon insulator
|
|
|
mounting
|
pole mount
|
|
|
bracket diameter
|
30 - 50 mm
|
|
|
dimensions
|
790 x 100 x 50 mm
|
|
|
weight
|
2050 g
|
|
|
package
|
paperboard
|
|
ExtraEter 18 dBi
|
ExtraEter 18 antenna is predicted 2,4 GHz frequency for base stations. Antenna works
at the horizontal polarization and has 18 dBi gain.
At present it is one of the most high-gain omnidirectional antennas, which are available
on the market.
ExtraEter 18 omnidirectional antenna can cover area up to 15 km.
The omni antenna of ExtraEter 18 is made of aluminium waveguide, with cut-set dimensions
of 50x100mm, which allows for the 360 degrees cover (with the full antenna gain).
The antenna has 32 slots. Using gold plated elements allows for strong, constant
signal and failure free operation for long time.
ExtraEter 18 antenna comes with N Female connector and it's equipped with stainless
and robust mast mount bracket, which allows downtilt of 15 degrees. Antennas carry
a 5 years warranty.
|
|
antenna type
|
omnidirectional
|
|
frequency range
|
2,4 - 2,5 GHz
|
|
gain
|
For 2,442 GHz (7th channel), 18 dBi
dBi
|
|
polarization
|
horizontal
|
|
back ratio
|
0 dB
|
|
vertical beam width
|
36 ° for -3dB
|
|
horizontal
beam width
|
360 ° for -3dB
|
|
VSWR
|
1 to 1,8
|
|
|
Impedance
|
50 Ohm
|
|
|
connector
|
gilded N/Female with Teflon insulator
|
|
|
mounting
|
pole mount
|
|
|
bracket diameter
|
30 - 50 mm
|
|
|
dimensions
|
1450 x 100 x 50 mm
|
|
|
weight
|
3050 g
|
|
|
package
|
paperboard
|
|
ExtraEter 15 dBi
|
ExtraEter 15 dBi antenna is predicted 2,4 GHz frequency for base stations. Antenna
works at the horizontal polarization and has 15 dBi gain.
The vertical beam width of 11 degrees facilitates the connections in short distances
when the height location requires the wide vertical beamwidth.
The omnidirectional antenna of ExtraEter 15 is made of aluminium waveguide, with
cut-set dimensions of 50x100mm, which allows for the 360 degrees cover (with the
full antenna gain). Using gold plated elements allows for strong signal and failure
free operation for long time.
ExtraEter 15 antenna comes with N Female connector and it's equipped with stainless
and robust mast mount bracket, which allows downtilt of 15 degrees. Antennas carry
a 5 years warranty.
|
|
antenna type
|
omnidirectional
|
|
frequency range
|
2,4 - 2,5 GHz
|
|
gain
|
For 2,442 GHz (7th channel), 15 dBi
dBi
|
|
polarization
|
horizontal
|
|
back ratio
|
0 dB
|
|
vertical beam width
|
11 ° for -3dB
|
|
horizontal
beam width
|
360 ° for -3dB
|
|
VSWR
|
1 to 1,4
|
|
|
Impedance
|
50 Ohm
|
|
|
connector
|
gilded N/Female with Teflon insulator
|
|
|
mounting
|
pole mount
|
|
|
bracket diameter
|
30 - 50 mm
|
|
|
dimensions
|
790 x 100 x 50 mm
|
|
|
weight
|
2000 g
|
|
|
package
|
paperboard
|
|
ProEter 10dBi
|
ProEter 10 dBi is the omnidirectional antenna designed for the frequency of 2,4
GHz. ProEter 10 works at the vertical polarization, has 10 dBi gain, it's predicted
as the base station antenna.
ProEter 10 can be used for connections in short distances when height of a
location requires the wide vertical beamwidth.
Can be used inside and outside buildings.
This New design is characterized by low weight and better stability, which we achieve
thanks to using a new type of mounting.
Antenna comes with N Female connector in standard, is equipped with U-bolt for mast
mounting. They carry a 3 years warranty.
They carry a 3 years warranty.
|
|
antenna type
|
omnidirectional
|
|
frequency range
|
2,4 - 2,5 GHz
|
|
gain
|
10 dBi
|
|
polarization
|
vertical
|
|
back ratio
|
n/a dB
|
|
vertical beam width
|
23 °
|
|
horizontal
beam width
|
360 °
|
|
VSWR
|
1 to 1,5
|
|
|
Impedance
|
50 Ohm
|
|
|
connector
|
N Female
|
|
|
mounting
|
pole mount
|
|
|
bracket diameter
|
30 - 50 mm
|
|
|
dimensions
|
675 x fi 22 mm
|
|
|
Mweight
|
350 g
|
|
|
package
|
paperboard
|
|
LineEter 16dBi
|
The flat panel LineEter19 antenna offered by CyberBajt company works at the 2,4
GHz frequency and offers 19 dBi gain.
Antenna radome is constructed of the high quality ABS material, which protect it
against severe weather conditions and solar radiation.
There is used microwave PCB technology, which gives incomparable high gain in comparison
with its dimensions.
LineEter19 antenna is predicted to be used in client installations. Can cover the
area up to 7-8km with the angle of 25 degrees.
LineEter 19 can work in the horizontal or vertical polarization, depending on antenna
settings. The antenna comes N Female connector in standard.
The outdoor case, integrated with the antenna, is useful to install devices inside
and use short connection cable.
The LineEter + outdoor case system is equipped with the stainless bracket, which
offer the tilt of 10 degrees.
The antenna tilt regulation is enable even though usage of the case. Antennas carry
a 3 years warranty.
|
|
antenna type
|
directional
|
|
frequency range
|
2,4-2,5 GHz
|
|
gain
|
16 dBi
|
|
polarization
|
horizontal or vertical
|
|
vertical beam width
|
23 °
|
|
horizontal beam width
|
28 °
|
|
|
VSWR
|
1 up to 1,3
|
|
|
input impedance
|
50 Ohm
|
|
|
back ratio
|
N/A dB
|
|
|
connector
|
N Female gold plated
|
|
|
wind loading
|
85 m/s
|
|
|
mounting
|
mast mounting
|
|
|
Rset content
|
antenna, bracket, datasheet, manual
|
|
|
dimensions
|
190 x 240 x 40 mm
|
|
|
Sweight
|
400 g
|
|
|
package
|
cardboard
|
|
LineEter 19 dBi
+ outdoor case
|
The flat panel LineEter19 antenna offered by CyberBajt company works at the 2,4
GHz frequency and offers 19 dBi gain. Antenna radome is constructed of the high
quality ABS material, which protect it against severe weather conditions and solar
radiation.
There is used microwave PCB technology, which gives incomparable high gain in comparison
with its dimensions.
LineEter19 antenna is predicted to be used in client installations.
Can cover the area up to 7-8km with the angle of 25 degrees. LineEter 19 can work
in the horizontal or vertical polarization, depending on antenna settings. The antenna
comes N Female connector in standard.
The outdoor case, integrated with the antenna, is useful to install devices inside
and use short connection cable.
The LineEter + outdoor case system is equipped with the stainless bracket, which
offer the tilt of 10 degrees. The antenna tilt regulation is enable even though
usage of the case. Antennas carry a 3 years warranty.
|
|
antenna type
|
directional
|
|
frequency range
|
2,4 - 2,5 GHz
|
|
gain
|
19 dBi
|
|
polarization
|
linear, vertical or horizontal
|
|
vertical beam width
|
20 °
|
|
horizontal beam width
|
25 °
|
|
VSWR
|
1 to 1,4
|
|
Impedance
|
50 Ohm
|
|
|
connector
|
N Female
|
|
|
wind loading
|
85 m/s
|
|
|
mounting
|
pole mount
|
|
|
bracket diameter
|
O30 - 50 mm
|
|
|
dimensions
|
250 x 340 x 30 mm
|
|
|
internal case dimensions
|
210 x 210 x 50 mm
|
|
|
weight
|
750 g
|
|
|
package
|
paperboard
|
|
LineEter 16 dBi
+ outdoor case
|
The flat panel LineEter16 antenna offered by CyberBajt company works at the 2,4
GHz frequency and offers 16 dBi gain. Antenna radome is constructed of the high
quality ABS material, which protect it against severe weather conditions and solar
radiation. There is used microwave PCB technology, which gives incomparable high
gain in comparison with its dimensions. LineEter16 antenna is predicted to be used
in client installations.
Can cover the area up to 4-5km with the angle of 30 degrees.
LineEter 16 can work in the horizontal or vertical polarization, depending on antenna
settings.
The antenna comes N Female connector in standard.
The outdoor case, integrated with the antenna, is useful to install devices inside
and use short connection cable.
The LineEter + outdoor case system is equipped with the stainless bracket, which
offer the tilt of 10 degrees.
The antenna tilt regulation is enable even though usage of the case.
Antennas carry a 3 years warranty.
|
|
antenna type
|
directional
|
|
frequency range
|
2,4-2,5 GHz
|
|
gain
|
16 dBi
|
|
polarization
|
linear, vertical or horizontal
|
|
vertical beam width
|
23 °
|
|
horizontal beam width
|
28 °
|
|
|
VSWR
|
1 up to 1,3
|
|
|
input impedance
|
50 Ohm
|
|
|
back ratio
|
0 dB
|
|
|
connector
|
N Female
|
|
|
wind loading
|
85 m/s
|
|
|
mounting
|
pole mount
|
|
|
bracket diameter
|
30 - 50 mm
|
|
|
dimensions
|
190 x 240 x 40 mm
|
|
|
internal case dimensions
|
210 x 210 x 50 mm
|
|
|
package
|
paperboard
|
|
Yagi 12 dBi
+ outdoor case
|
The yagi antenna offered by CyberBajt company is constructed of the high quality
materials, which protect it against severe weather conditions.
Antenna works at the frequency of 2,4 GHz, has 12 dBi gain.
Yagi antennas are predicted to be used in client installations mainly.
Works well also in the point to point connections. Yagi12 antenna can work in the
horizontal or vertical polarization, depending on antenna settings.
The high polarization selectivity allows to work in high noise areas and in areas
where reflections of electromagnetic waves happen.
The Yagi12 antenna comes with 30 cm cable and N Female connector in standard. For
custom orders we can produce antenna with any cable lenght and connectors of SMA,
RP-SMA, RP-TNC, N-Male, TNC).
The outdoor case, integrated with the antenna, is useful to install devices inside
and maximal cable shorten.
The yagi + outdoor case system is equipped with the stainless bracket, which offer
the tilt of 25 degrees.
The antenna tilt regulation is enable even though usage of the case.
Antennas carry a 3 years warranty.
|
|
antenna type
|
directional
|
|
frequency range
|
2,4-2,5 GHz
|
|
gain
|
12 dBi
|
|
polarization
|
horizontal or vertical
|
|
vertical beam width
|
30 °
|
|
horizontal beam width
|
35 °
|
|
|
VSWR
|
1 to 1,4
|
|
|
impedance
|
50 Ohm
|
|
|
back ratio
|
N/A dB
|
|
|
connector
|
N Male
|
|
|
wind loading
|
90 m/s
|
|
|
mounting
|
pole mount
|
|
|
bracket diameter
|
30 - 50 mm
|
|
|
dimensions
|
250 x fi 75 mm
|
|
|
weight
|
500 g
|
|
|
package
|
cardboard
|
|
Yagi 16
+ outdoor case
|
The yagi antenna offered by CyberBajt company is constructed of the high quality
materials, which protect it against severe weather conditions. Antenna works at
the frequency of 2,4 GHz, has 16 dBi gain.
Yagi antennas are predicted to be used in client installations mainly.
Works well also in the point to point connections.
Yagi16 antenna can work in the horizontal or vertical polarization, depending on
antenna settings.
The high polarization selectivity allows to work in high noise areas and in areas
where reflections of electromagnetic waves happen. The Yagi16 antenna comes with
30 cm cable and N Female connector in standard.
For custom orders we can produce antenna with any cable lenght and connectors of
SMA, RP-SMA, RP-TNC, N-Male, TNC).
The outdoor case, integrated with the antenna, is useful to install devices inside
and maximal cable shorten.
The yagi + outdoor case system is equipped with the stainless bracket, which offer
the tilt of 25 degrees.
The antenna tilt regulation is enable even though usage of the case.
Antennas carry a 3 years warranty.
|
|
antenna type
|
directional
|
|
frequency range
|
2,4-2,5 GHz
|
|
gain
|
16 dBi
|
|
polarization
|
horizontal or vertical
|
|
vertical beam width
|
24 °
|
|
horizontal beam width
|
30 °
|
|
|
VSWR
|
1 to 1,4
|
|
|
impedance
|
50 Ohm
|
|
|
back ratio
|
N/A dB
|
|
|
connector
|
N Male
|
|
|
wind loading
|
85 m/s
|
|
|
mounting
|
pole mount
|
|
|
internal case dimensions
|
210 x 210 x 50 mm
|
|
|
dimensions
|
520 x fi 75 mm
|
|
|
Sweight
|
800 g
|
|
|
package
|
paperboard
|
|
LineEter 19 dBi
|
The yagi antenna offered by CyberBajt company is constructed of the high quality
materials, which protect it against severe weather conditions. Antenna works at
the frequency of 2,4 GHz, has 16 dBi gain. Yagi antennas are predicted to be used
in client installations mainly. Works well also in the point to point connections.
Yagi16 antenna can work in the horizontal or vertical polarization, depending on
antenna settings. The high polarization selectivity allows to work in high noise
areas and in areas where reflections of electromagnetic waves happen. The Yagi16
antenna comes with 30 cm cable and N Female connector in standard. For custom orders
we can produce antenna with any cable lenght and connectors of SMA, RP-SMA, RP-TNC,
N-Male, TNC). The outdoor case, integrated with the antenna, is useful to install
devices inside and maximal cable shorten. The yagi + outdoor case system is equipped
with the stainless bracket, which offer the tilt of 25 degrees. The antenna tilt
regulation is enable even though usage of the case.
Antennas carry a 3 years warranty.
|
|
antenna type
|
directional
|
|
frequency range
|
2,4-2,5 GHz
|
|
gain
|
19 dBi
|
|
polarization
|
linear, vertical or horizontal
|
|
vertical beam width
|
24 °
|
|
horizontal beam width
|
30 °
|
|
|
VSWR
|
1 to 1,4
|
|
|
impedance
|
50 Ohm
|
|
|
back ratio
|
N/A dB
|
|
|
connector
|
N/Female goldplated
|
|
|
wind loading
|
85 m/s
|
|
|
mounting
|
pale mount
|
|
|
internal case dimensions
|
210 x 210 x 50 mm
|
|
|
dimensions
|
520 x fi 75 mm
|
|
|
Sweight
|
800 g
|
|
|
package
|
paperboard
|
|
Grid2424
|
The GRID antenna works at frequency of 2,4 GHz and has 24 dBi gain.
This antenna can be ordered with any length of RF7 cable and with any available
connector, which makes costs of installation lower.
GRID antennas have a very small resist against wind, that allows install these antennas
in places where are very strong blasts of wind.
|
|
antenna type
|
grid
|
|
frequency range
|
2,4 - 2,49 GHz
|
|
gain
|
24 dBi
|
|
polarization
|
horizontal or vertical
|
|
vertical beam width
|
7 °
|
|
horizontal beam width
|
10 °
|
|
|
VSWR
|
1 to 1,5
|
|
|
impedance
|
50 Ohm
|
|
|
connector
|
N/Female
|
|
|
mounting
|
pole mount
|
|
|
bracket diameter
|
30 - 50 mm
|
|
|
dimensions
|
610 x 1020 mm
|
|
|
weight
|
3000 g
|
|
|
package
|
paperboard
|
|
Big feed element
|
This feed element can be used for dishes with diameter from 90 to 120 cm.
|
|
frequency range
|
2,4 - 2,5 GHz
|
|
gain
|
10 dBi
|
|
polarization
|
vertical or horizontal
|
|
VSWR
|
1 to 1,5
|
|
Impedance
|
50 Ohm
|
|
the end of cable without a conn.
|
H-155, 30 cm
|
|
|
connector
|
N Female
|
|
|
mounting
|
for the bracket of 40 mm
|
|
|
package
|
paperboard
|
|
Small feed element
|
This feed element can be used for dishes with diameter up to 75 cm.
|
|
antenna type
|
directional
|
|
frequency range
|
2,4-2,5 GHz
|
|
gain
|
16 dBi
|
|
polarization
|
horizontal or vertical
|
|
vertical beam width
|
23 °
|
|
horizontal beam width
|
28 °
|
|
|
VSWR
|
1 up to 1,3
|
|
|
input impedance
|
50 Ohm
|
|
|
back ratio
|
N/A dB
|
|
Panel 11 dBi
|
Panel 11 is a directional antenna working at the frequency of 2,4 GHz, offers 11
dBi gain.
Antenna is made of fully waterproof plastic case, which is resistant for solar radiation.
This flat panel is equipped with stainless mounting brackets which allow to install
antenna on a mast.
The bracket gives a possibility to tilt the antenna of 20 degrees. Panel 11 which
can work in any polarization.
The Panel11 can work in vertical or horizontal polarization.
The main application of this fla 2,4 GHz panel is the client installation. Antenna
has the best factor price/quality.
Panel 11 can be ordered with different connectors and any cable lenght which is
suitable for any installation.
Antennas carry a 2 years warranty.
|
|
antenna type
|
directional
|
|
frequency range
|
2,4-2,5 GHz
|
|
gain
|
11,5 dBi
|
|
polarization
|
horizontal or vertical
|
|
vertical beam width
|
28 °
|
|
horizontal beam width
|
25 °
|
|
|
VSWR
|
1 to 1,3
|
|
|
impedance
|
50 Ohm
|
|
|
back ratio
|
0 dB
|
|
|
connector
|
RP-SMA
|
|
|
the end of cable without a con.
|
RF5, 30 cm
|
|
|
mounting
|
pole mount
|
|
|
bracket diameter
|
33 - 45 mm
|
|
|
dimensions
|
143 x 120 x 33 mm
|
|
|
package
|
paperboard
|
|
Logarithmic 23 dBi
|
This antenna is used as a directional antenna to receiving a signal from an omni-directional
antenna and to join 2 points in p2p connections.
|
|
antenna type
|
parabolic
|
|
frequency range
|
2,4 - 2,5 GHz
|
|
gain
|
23,5 dBi
|
|
polarization
|
horizontal or vertical
|
|
vertical beam width
|
10 °
|
|
horizontal beam width
|
8 °
|
|
|
VSWR
|
1 to 1,5
|
|
|
impedance
|
50 Ohm
|
|
|
the end of cable
without a con.
|
H-155, 30 cm
|
|
|
connector
|
N Male
|
|
|
wind loading
|
65 m/s
|
|
|
mounting
|
pole mount
|
|
|
bracket diameter
|
38 - 51 mm
|
|
|
dish dimensions
|
820 x 920 mm
|
|
|
weight
|
3200 g
|
|
|
package
|
paperboard
|
|
Logarithmic 18 dBi
|
Logarithmic 18 dBi is a basis parabolic antenna with 18,7 dBi gain. It's used as
a directional antenna to receiving a signal from an omni-directional antenna and
to join 2 points in p2p connections.
|
|
antenna type
|
parabolic
|
|
frequency range
|
2,4 - 2,5 GHz
|
|
gain
|
18,7 dBi
|
|
polarization
|
vertical or horizontal
|
|
vertical beam width
|
16 °
|
|
horizontal beam width
|
12 °
|
|
|
VSWR
|
1 to 1,5
|
|
|
impedance
|
50 Ohm
|
|
|
back ratio
|
n/a dB
|
|
|
connector
|
N Male
|
|
|
the end of cable without a con.
|
H-155, 30 cm
|
|
|
mounting
|
mast mounting
|
|
|
bracket diameter
|
38 - 51 mm
|
|
|
dish dimensions
|
620 x 700 mm
|
|
|
weight
|
2000 g
|
|
|
package
|
paperboard
|
|
Yagi 16 dBi
|
The yagi antenna offered by CyberBajt company is constructed of the high quality
materials, which protect it against severe weather conditions.
Antenna works at the frequency of 2,4 GHz, has 16 dBi gain.
Yagi antennas are predicted to be used in client installations mainly.
Works well also in the point to point connections.
Yagi16 antenna can work in the horizontal or vertical polarization, depending on
antenna settings.
The high polarization selectivity allows to work in high noise areas and in areas
where reflections of electromagnetic waves happen.
The Yagi16 antenna comes with 30 cm cable and N Female connector in standard.
For custom orders we can produce antenna with any cable lenght and connectors of
SMA, RP-SMA, RP-TNC, N-Male, TNC).
The yagi system is equipped with the stainless bracket, which offer the tilt of
25 degrees.
Antennas carry a 3 years warranty.
Yagi antennas can be ordered with outdoor cases also.
|
|
antenna type
|
directional
|
|
frequency range
|
2,4-2,5 GHz
|
|
gain
|
16 dBi
|
|
polarization
|
horizontal or vertical
|
|
vertical beam width
|
24 °
|
|
horizontal beam width
|
30 °
|
|
|
VSWR
|
1 to 1,4
|
|
|
impedance
|
50 Ohm
|
|
|
back ratio
|
N/A dB
|
|
|
connector
|
N Male
|
|
|
wind loading
|
85 m/s
|
|
|
mounting
|
pole mount
|
|
|
bracket diameter
|
30 - 50 mm
|
|
|
dimensions
|
520 x fi 75 mm
|
|
|
weight
|
800 g
|
|
|
package
|
paperboard
|
|
GRID2419
|
The GRID antenna works at frequency 2400-2490 MHz and has 19 dBi gain. This antenna
can be ordered with any length of RF7 cable and with any available connector, what
is very friendly for the customers. GRID antennas have a very small resist against
a wind, what allows install these antennas in places where are very strong blasts
of wind.
|
|
antenna type
|
grid
|
|
frequency range
|
2,4 - 2,49 GHz
|
|
gain
|
19 dBi
|
|
polarization
|
horizontal or vertical
|
|
vertical beam width
|
11 °
|
|
horizontal beam width
|
13 °
|
|
|
VSWR
|
1 to 1,5
|
|
|
connector
|
N/Female
|
|
|
mounting
|
pole mount
|
|
|
bracket
diameter
|
30 - 50 mm
|
|
|
dimensions
|
600 x 730 mm
|
|
|
weight
|
2000 g
|
|
|
package
|
paperboard
|
|
|
dimensions
|
190 x 240 x 40 mm
|
|
|
Sweight
|
400 g
|
|
|
package
|
cardboard
|
|
Yagi 12 dBi
|
The yagi antenna offered by CyberBajt company is constructed of the high quality
materials, which protect it against severe weather conditions.
Antenna works at the frequency of 2,4 GHz, has 12 dBi gain.
Yagi antennas are predicted to be used in client installations mainly.
Works well also in the point to point connections.
Yagi12 antenna can work in the horizontal or vertical polarization, depending on
antenna settings.
The high polarization selectivity allows to work in high noise areas and in areas
where reflections of electromagnetic waves happen.
The Yagi12 antenna comes with 30 cm cable and N Female connector in standard.
For custom orders we can produce antenna with any cable lenght and connectors of
SMA, RP-SMA, RP-TNC, N-Male, TNC).
The yagi system is equipped with the stainless bracket, which offer the tilt of
25 degrees. Antennas carry a 3 years warranty. Yagi antennas can be ordered with
outdoor cases also.
|
|
antenna type
|
directional
|
|
frequency range
|
2,4-2,5 GHz
|
|
gain
|
12 dBi
|
|
polarization
|
horizontal or vertical
|
|
vertical beam width
|
30 °
|
|
horizontal beam width
|
35 °
|
|
|
VSWR
|
1 to 1,4
|
|
|
impedance
|
50 Ohm
|
|
|
back ratio
|
N/A dB
|
|
|
connector
|
N Male
|
|
|
wind loading
|
90 m/s
|
|
|
mounting
|
pole mount
|
|
|
bracket diameter
|
30 - 50 mm
|
|
|
dimensions
|
150 x fi 75 mm
|
|
|
weight
|
500 g
|
|
|
package
|
paperboard
|
|
|
|
|
|
|
